Product ID:RP 1257-3 HARDENER
MSDS Date:04/28/1988
FSC:8030
NIIN:00F040576
Kit Part:Y
MSDS Number: BXLYF

CIBA GEIGY CORP PLASTICS & ADDITIVES

THREE SKYLINE DRIVE
HAWTHORNE, NY 10532-2119
US

Emergency Phone: 800-888-8372/914-347-4700

Info Phone: 800-888-8372/914-347-4700

Preparer: PERER HENIGE

Cage: EO945

CIBA-GEIGY CORP ADDITIVES DIV.

HAWTHORNE, NY 10532-2119 US

Telephone: 800-888-8372

Cage: 07566

BISPHENOL A, BISPHENOL

CAS: 80-05-7

RTECS: SL6300000

SILICON DIOXIDE, CELITE 322

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/CUM

ACGIH TLV: 0.2 MG/CUM

DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL)

CAS: 111-40-0

RTECS: IE1225000

ACGIH TLV: 1 PPM (SKIN)

NONYL PHENOL

CAS: 25154-52-3

RTECS: SM5600000

CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 10 MG/CUM (DUST)

HYDRATED ALUMINA, ALUMINUM HYDROXIDE, ALUMINUM OXIDE

CAS: 21645-51-2

RTECS: BD0940000

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 2 MG/CUM (DUST)

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: CORROSIVE. CAUSES BURNS.
SENSITIZATION POSSIBLE IN SUSCEPTIBLE INDIVIDUALS. OVEREXPOSURE
CAUSES ALLERGIC SKIN & RESPIRATORY REACTION. HEATED PRODUCT MAY
PRODUCE INHALABLE VAPORS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS.

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO
DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN/CPR IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CORROSIVE. DECOMPOSITION & COMBUSTION
PRODUCTS MAY BE TOXIC.

Spill Release Procedures:REMOVE BY ABSORBING IN ABSORBENT MATERIAL.
AVOID CONTACT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. USE W/ADEQUATE
VENTILATION.
Other Precautions:DON'T GET IN EYES, ON SKIN, ON CLOTHING. AVOID
BREATHING VAPOR/MIST. NUSIANCE DUST MAY BE GENERATED WHEN
SANDING/SAWING CURED MATERIAL.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:MECHANICAL (GENERAL) & LOCAL EXHAUST IAW/ACGIH
RECOMMENDATIONS.
Protective Gloves:IMPERMEABLE
Eye Protection:FULL FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Vapor Pres:1.12
Spec Gravity:1.6-1.7
Solubility in Water:SLIGHT
Appearance and Odor:BLUE PASTE W/AMMONIACAL ODOR
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, METAL ORGANIC COMPOUNDS
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.